Warning

This page was automatically imported and has not been manually cleaned up and checked yet.

There might be strange or incorrect formatting, dead links, and other issues.

The Instrustar MDSO-LA is a USB-based, same hardware as YiXingDianZi MDSO except that add the logic analyzer and a double eeprom to provide 2 different VID/PID.

  • 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate,
  • 8/16-channel logic analyzer with a max. sampling rate of 24MHz.

Hardware

The device has a switch. Depending on the position it comes up with different USB VID/PIDs:

Cypress FX2 pinout:

NXP 74HC4051D (upper/lower, CH1/CH2) pinout:

| | |||

Microchip 24LC02B (top / bottom) pinout: There are 2 for the 2 possible hardware configurations (as MSDO-LA or as USBee)

| | |||

Analog Devices AD9288 pinout: | | |AD9288 pins|Description| |S1, S2|S1=VCC, S2=GND. "Normal operation, data align disabled".| |DFS|Tied to GND. Data format select = "offset binary" (not "twos complement").| |A~IN~A, A~IN~B|Analog input channels.| |D0~A~-D7~A~|Connected to FX2 PB0-PB7.| |D0~B~-D7~B~|Connected to FX2 PD0-PD7.|

Photos

Resources