Kingst LA5016

Warning

This page was automatically imported and has not been manually cleaned up and checked yet.

There might be strange or incorrect formatting, dead links, and other issues.

The Kingst LA5016 is a USB-based, 16-channel logic analyser with 500MHz maximum sampling rate and 256MiB sample memory. It is part of the Kingst LA Series and is supported by the kingst-la2016 sigrok driver.

The USB identification is shared among Kingst LA devices. See Kingst LA2016, the same VID:PID and the same USB endpoints are used.

Hardware

TODO Add more details.

  • Cypress FX2 MCU
  • AT24C02 EEPROM
  • Cyclone IV FPGA (Altera/Intel)
  • U10 authentication device
  • 2Gib DRAM
  • a bunch of regulators
  • opamp for input threshold control

Photos

Size comparison LA5016 and LA2016

Probe connectors LA5016 and LA2016

Case components (two U shaped symmetric halves, and faces)

LA5016 PCB, top side

LA5016 PCB, bottom side

Protocol

See the Kingst LA Series page, all devices communicate to the host in identical ways.

Firmware

Device firmware must be extracted from vendor software before sigrok use. See Kingst LA Series for details.