Noname LHT00SU1

Warning

This page was automatically imported and has not been manually cleaned up and checked yet.

There might be strange or incorrect formatting, dead links, and other issues.

The Noname LHT00SU1 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

Note: fx2lafw currently doesn't support switching between the two possible analog channels, 1ACH will be used unconditionally.

See Noname LHT00SU1/Info for some more details (such as lsusb -v output) on the device.

Hardware

There's a jumper on the PCB which write-protects the I²C EEPROM when set (it ships in that state) by keeping the WP pin at 3.3V.

Photos

LTH00SU1-V5.0:

Package contents

Device, top

Device, bottom

PCB, top

PCB, bottom

Cypress FX2

TLC5510I

Unknown SO8

LM358

HEF4051BT

Bochen 3296

AMS1117-3.3

24C02N

LINSOU21-V1.3:

PCB, top

PCB, bottom

T100-B-V1.2:

PCB, top

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources