Robomotic MiniLogic

Warning

This page was automatically imported and has not been manually cleaned up and checked yet.

There might be strange or incorrect formatting, dead links, and other issues.

The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

It is a clone of the Saleae Logic.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See Robomotic MiniLogic/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Main chip: Cypress CY7C68013A-56PVXC (FX2LP) (datasheet )
Octal 3-state non-inverting buffer/line-driver/line-receiver: 74HC244A (TODO: vendor?)
1A low-dropout voltage regulator (3.3V): Advanced Monolithic Systems AMS1117-3.3 (datasheet )
2K I2C serial EEPROM: 2x Microchip 24LC02BI (datasheet )
64K I2C serial EEPROM: Microchip 24LC64I (datasheet )

Device, front

Device, back

PCB, front

PCB, back

Cypress FX2

74HC244A

AMS1117

2x Microchip 24LC02BI

Microchip 24LC64I

See also this flickr set for more photos of the device.

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

TODO.