Hantek iDSO1070A
Warning
This page was automatically imported and has not been manually cleaned up and checked yet.
There might be strange or incorrect formatting, dead links, and other issues.
The Hantek iDSO1070A is a USB/WiFi-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 250MS/s sampling rate.
Hardware
-
Main chip: Xilinx Spartan XC3S50A (datasheet )
-
Wifi module: MxChip EMW3162 (datasheet )
-
Main oscillator: 50MHz 50.000 YX FH
Photos
PCB, top
PCB, bottom
Channel module
WiFi Module
Detail
Notes
- Has been found cross channel interference. To observe this just connect Channel 1 to 5V DC and it is possible to see the shift of Channel 2 zero offset.
Protocol
Reverse engineered implementation of the protocol